Clip type 40 and 49 for heavy rails

Material language
Electric steel, with the following mechanical characteristics
Tensile strength [N/mm2] Elongation after fracture min. [%]
410-490 23

Dimensions, weight and limit tolerances
According to STAS 2952-80

Type of clips

 Dimension and limit tolerances Weight ( +/- 2 % )
In bars [Kg/m] Unmachined [Kg/pcs] Machined [Kg/pcs]
40 A Acc. to fig. 1 5,79 0,31 0,26
40 B Acc. to fig. 2 5,79 0,74 0,65
49 A Acc. to fig. 3 10,03 0,65 0,63
49 CN Acc. to fig. 4 16,70 1,25 1,20
*) Limit tolerance for other dimensions: +0,75 / -0,5 mm

Shape deviations
Cut ends off-square ness (cut clips) +/- 2 mm
Burss due to cutting max. 6 mm

Delivery state, delivery lengths, delivery
Delivery state Delivery lengths Delivery
Rough rolled, in bars, without heat treatment 4 - 6 In bundles of 2 - 3 t
Cut (cold sawn or cut with form knives ) According to figure 1 - 4 In bulk or containers weighing 3 - 5 t
Machined (cut at ordered length, with machined fastening holes and drilled ) According to figure 1 - 4 In bundles of 50 pieces tiedwith wire