|
|
Sole plate type 40, 49 and 60 |
|
| for heavy rayls |
 |
Electric steel, with the mechanical characteristics according to UIC 864-6
| Tensile strength [N/mm2] | Elongation after fracture min. [%] |
| 410-490 | 23 |
Dimensions and limit tolerances
According to STAS 2952-80
|
Dimensions and tolerances |
According to fig. 1-13 |
|
Countersink of the milled bolt hole |
max. 1 mm |
Shape deviations
| Cut ends off-square ness ( cutted sole plates ) | +/- 4 mm | |
| Flatness of the railchairsurface | 0,4 mm/ 100 mm | |
| Flatness of the sleeper rest in longitudinal and transversal direction | 0,3 mm/ 100 mm | |
Weight of fishplates
| Type of sole plate | Weight ( +/- 2 %) | |
| In bars [Kg/m] | Machined [Kg/pcs.] | |
40 A |
33,71 | 4,72 |
|
40 B |
33,71 | 4.18 |
|
40 E |
54,64 | 7,93 |
|
40 E1 |
54,64 | 7,45 |
|
49 A |
58,29 | 8,02 |
|
49 B |
58,29 | 7,25 |
|
49 B1 |
58,29 | 5,82 |
|
49 E |
55,65 | 8,17 |
|
49 E1 |
55,65 | 7,91 |
|
49 G |
55,65 | 6,62 |
|
49 G1 |
55,65 | 5,51 |
|
60 A |
66,25 | 8,81 |
|
60 A1 |
66,25 | 7,52 |
|
60 E |
58,79 | 8,67 |
|
60 E1 |
58,79 | 8,11 |
|
60 G |
58,79 | 7,03 |
|
60 G1 |
58,79 | 5,85 |
Delivery state, delivery lengths, delivery
| Delivery state | Delivery lengths | Delivery |
| Rough rolled, in bars, without heat treatment | 6 - 11 | In bundles of 2 - 3 t |
| Cut (cold sawn or cut with form knives ) | According to figure 1 - 13 | In bulk or containers weighing 3 - 5 t |
| Machined (cut at ordered length, with machined fastening holes andmiled areas for rail fastening ) | According to figure 1 - 13 | In bundles of 2 - 5 pieces / bundle |